How to install Stand light box of PTC Display?

Step 1. Open flight case
步骤1：打开航空箱

Step 2. Take out all aluminum frame, take care as it contains LED stripe on the frame.
步骤2：拿出所有的铝材，轻拿轻放，因为铝材上有LED灯珠

Step 3. Connect the side frames using the Trox head screwdriver in the parts
步骤3：用六角扳手连接铝材

Step 4. Install the support beam in the middle of the side frame.
步骤4：安装横向和纵向支撑杆


Step 5. install 4pcs feet with the screw
步骤5：安装底脚

Step 6. Connect the LED stripe and electric wire, need carefully, the two pins easy to broken
步骤6：连接LED灯条和电线，注意要小心一点，这两根针容易折断


Step 7. Install the Transformer, it has two in left side and right side
步骤7：安装电源，注意有两个，左右各一个

Step 8. Install light box frame finish
步骤8：硬件安装完毕

Step 9 Install front graphic
步骤9：安装画面

Step 10 Install shadow fabric on the back
步骤10：安装背面遮光布

Step 11 Well done! put on the light, you will see an important moment.
步骤11：完毕！打开灯，下面是见证奇迹的时刻。